form
Responsive Menu
Add more content here...
How to Properly Install RFID LaundryChip

How to Properly Install RFID LaundryChip ?

JYL-Tech offers several options of RFID Laundrychip to apply on textiles. Determining the best selection depends on the textile type and the laundry processes. Our experts willing to assist you for your application.

Tips to help get a best possible results:

  • In order to not affect RFID Laundrychip‘s performance, install the RFID Laundrychip away from the textile folding lines, close to the textile corners.
  • Seams must NEVER pass through transponder’s central core module.
Stitch Tagging (T)

To be stitched into the hem of a textile. Sewing two ends (as shown in the figure below)

Sewing three sides without pricking the metal thread of horizontal long side (as shown in the figure below)

  • How to stitch?
    1, Place the laundry tag inside the textile. Sewing lines surround tag’s extremities.
    2, Stay less than 5mm from the tag’s edge when stitching.
    3, Pay special attention to not damage your sewing facility if you stitch over the antenna wire extremities.
    Stitch must NEVER pass through the core module.
  • Where to stitch?
    Stitch the laundry tag away from the folding lines.
In Pouch (P)

To be stitched like a standard care label. Putting into the weaving pouch (as shown in the figure below)

  • How to stitch?
    Place the pouch BELOW the hem. Fix the pouch BELOW the hem. Fix the pouch one along each side. Stitches must NEVER pass over the laundry tag’s antenna wire or the core module.
  • Where to stitch?
    Stitch the laundry tag away from the folding lines.
Heat Sealing (H)

To be heat-sealed directly on the textile at +215°C, with 0.6~0.8Mpa pressure for 18s. And the pressure should be concentrated on the tag (as shown in the figure below)

  • How to heat sealed?
    1, Place clean and dry textile under the heat-sealing machine.
    2, Place the adhesive side of the tag on textile flat surface, avoiding any relief and folding line.
Hanging (HT)


To be hung with the brand label. (as shown in the figure below)

  • How to hang?
    Punching a hole on the narrow side of the laundry tag.
  • Where to stitch?
    Hanging the laundry tag with brand label.

JYL-Tech can customize RFID laundry chip for Garment & Linen to meet your unique requirements for size, programming and materials. Find the for Garment & Linen that meets your business needs. Ask us to help you find the right decision.

Contact Form

We can help you?

Share this page